CUSTOM VALVE-SCREW KIT for BENJAMIN MAXIMUS

$6.50

 These screws are designed by Magnum Airpower LLC and custom manufactured. They are Torx-drive and made of high-strength heat treated 410 stainless steel. They have a slightly larger head diameter that fits the holes in the tube better. They have a lower profile to fit better with custom stocks. They are the same length and thread size as the OEM screws so they are a direct replacement with no modifications to your gun. They will safely handle operating pressures up to 2400 PSI for increased shot count and/or power. A stronger striker spring may also be needed to gain more power. The compact power adjuster I have listed is a comfortable fit with all Maximus models. To use that adjuster you will also need one of the striker springs I have listed, the Maximus spring doesn't fit the adjuster. The Discovery spring works well and so does the 3000 PSI spring if it's at a relatively light adjustment.

  All of the other Maximus PCP components can safely handle up to 3000 PSI. It only has two valve screws, this is what limits it to lower pressure. All other Crosman/Benjamin PCP models have three valve screws. This kit includes 2 screws and a T10 bit. Message me if you have any questions, making modifications to your airgun can be dangerous if not done correctly. Empty all air or CO2 pressure from your airgun before installing these screws or a fatal injury could occur. 

 These are 410 stainless steel heat treated to meet metric class 12.9 with a specified hardness of HRc 39-43. The approximate tensile strength is in the 177,000 - 196,000 PSI range.

  The screws require a T10 driver. The included T10 bit can be used with a bit driver to snug the screws down tight. Do not over-tighten the screws, they should be hand-tight using a driver handle. Using a wrench or ratchet can damage the threads in your valve.