4000 PSI GAUGE - HEAVY DUTY INDUSTRIAL GRADE
WE ALSO HAVE BLEMISHED VERSIONS OF THESE GAUGES LISTED AT A DISCOUNT IN OUR CLEARANCE SECTION, THEY HAVE SLIGHT COSMETIC FLAWS BUT WORK PERFECTLY
This 4000 PSI gauge is not a cheap paintball gauge, it's designed for heavy-duty industrial use with high-pressure air, gases and hydraulics. It's a perfect upgrade for all PCP and HPA airguns that operate at up to 4000 PSI. We use these for all our custom PCP and HPA guns and gauged fill-adapters. 15/16" six-point socket fits perfectly, an adjustable wrench can also be used. It measures 15/16" from flat to flat and 1" from point to point with a nickel-plated brass case and 1/8 NPT male center-back connection. Thread tape or sealant (not included) is required for installation. We have military-grade thread tape listed separately. The cover and dial can be removed by using a standard air compressor to blow air into the vent-hole on the back of the casing, do this with the gauge pointed into a bag or box to safely catch the parts which will blow-off with considerable force. The dial can be placed with the needle in whatever position you want to adjust the pressure reading, or if there's no pressure, the middle of the box below the first line as shown in the photo is the standard position. The cap snaps back in place, use a flat surface like a table top to push it on flush and even with the casing.