FACTORY CROSMAN/BENJAMIN BARRELS
SELECT THE BARREL YOU WANT FROM THE DROP-DOWN MENU TO DISPLAY CORRECT PRICE AND NUMBER IN STOCK
WE RE-STOCK BARRELS REGULARLY, IF ONE IS OUT OF STOCK FOR MORE THAN A WEEK IT MAY BE TEMPORARILY UNAVAILABLE FROM CROSMAN
These are genuine Crosman/Benjamin rifled barrels that are standard 7/16" outside diameter. Many of them are interchangeable to allow easy conversion from one caliber to another or to longer or shorter lengths. Most will fit models other than the ones they were intended for. All barrels require a bolt of matching caliber. The second photo shows a standard barrel muzzle with a sight-flat on the top. All of the listed barrels have this type of muzzle except for the 10.25" which have the style shown in the third photo. None of the barrels listed will fit the older 1377 or 1322 models that have a sliding breech cover unless you convert to a modern steel breech and bolt and none will fit the 1389 Backpacker.
For 1377, 1322, PC77 and some 1300KT the original barrel length is 10.25". To use a longer barrel you will need a barrel band that allows it to fit. We have those bands listed in the Custom & Upgrade Parts category. Barrels shorter than 10.25" will not fit these variable-pump models.
7.5" Barrels fit 1740, 2240 and all 2300 models.
10.1" Barrels fit 1740, 2240, all 2300, 2250 and 2400KT.
10.25" Barrels fit 1377, 1322, PC77 and 1300KT. They also fit 1740, 2240, 2300KT, 2250 and 2400KT. These barrels have the smaller diameter tip shown in the third photo that fits into the original 13XX barrel band for 10.25" barrels. For use on other models like the 2240, most muzzle brakes for 7/16" diameter barrels will fit. Crosman plastic push-on front sights will not.
14.6" Barrels are original to 2250 and 2400KT models. They have a dimple on top for the barrel band set-screw.
18" Barrels fit 1740, 2240, all 2300, 2250, 2400KT, all 13XX, 2289, 1760 and 2260. Crosman reserves these for their Custom Shop models so we rarely have them in stock.
The 24" .22 barrel is original to the 2260, it's fits every 13XX and 22XX well. The 24" .177 barrel is only listed in the Discovery version which doesn't fit small tubes well due to the flat for the rear barrel-mounted sight. The 26" barrels are original to Maximus models without a threaded adapter at the front. The 24" Discovery and 26" Maximus barrels have a 3/4" long flat spot (notch) on top of the barrel, this is centered 6-5/8" from the breech. The flat spot is shown in the last two photos. It allows a barrel-mounted rear sight to be mounted. With 2240 and 2300 there is not enough room for a barrel-mounted rear sight due to the barrel band location. For 2400KT and 2250 models this flat spot is where the barrel band set screw is located, this is shown in the last photo. A longer set screw is required to use this barrel with those models, 5/32" fits best, 3/16 will also work.
Although they fit, we don't suggest using barrels with a rear-sight flat on 1740, 2240, 2300, 2250 or 2400 models. The flat is positioned at or in front of the barrel band on these models which creates an easy spot for such a long barrel to bend. There are some custom applications where this is not an issue.