Magnum Degassing Adjuster Conversion Kit
THIS PART IS CURRENTLY ONLY AVAILABLE IN RAW 7075-T6 ALUMINUM WITH STAINLESS STEEL SPRING GUIDES. THEY WILL BE AVAILABLE IN BLACK ANODIZED FINISH IN A COUPLE MONTHS AND IN COMPLETE POWER ADJUSTER SETS FOR VARIOUS MODELS
This adjustment-knob kit converts our Magnum Power Adjusters to double as a degassing tool. It includes one of our custom hammer springs which can be selected in different wire diameters from the drop-down menu. It needs to be adjusted for each spring variant, this is done before shipping for the specific spring you choose. It has a spring guide that sits inside the hammer and a spring guide on the adjustment knob that touch when the hammer-spring is almost completely compressed, this allows the hammer to be forced forward to open the valve-stem and degas the gun without over-compressing the hammer-spring and doesn't prevent it from operating at full power. The guide inside the hammer is to prevent damage to adjustable hammers in models like the Marauder Pistol and our custom hammers which all have a set-screw adjustment inside the back. All you need to do is make sure the sear is released by pulling the trigger, loosen the locking collar and move it all the way to the rear of the knob, then adjust the knob forward until the air releases out through the barrel. Make sure the hammer is not cocked, the gun is not loaded and it's securely pointed in a safe direction with the bolt closed before pulling the trigger or starting the degassing process. If the hammer is cocked the degassing knob can damage the sear and other trigger-group parts. This adjuster knob is a little longer than the earlier version we relased that don't double as a degassing tool. It fits every Magnum Power Adjuster we've ever sold for all models.