LONG-BARREL BAND for 13XX - BRASS SCREW

$17.00

 IMPORTANT : Some tubes have the pivot-pin holes further back than others. Older tubes tended to have them closer to the front of the tube which fits this barrel band well. Newer tubes tend to have them back further which causes the barrel band holes to be sightly off center (too far forward) for the pivot pin to fit through easily. If you run into this problem the easiest fix is to simply file the front of the tube back slightly until the holes align. This is very easy to do, only a few file strokes are needed in most cases. Be very careful to keep filings out of the tube where they can cause damage to the seals.

 This band allows mounting of longer barrels on 1377, 1322, 1300KT and PC77 models. It's also a much more stable upgrade for the 2289G Backpacker. It's the Crosman Custom Shop 1300KT version with an upgraded socket cap screw. It was drilled and tapped to fit the screw which is long enough to engage the full-thickness of the threaded left side. This is a lot more durable than the original screw which tends to strip the threads in the band if over-tightened or repeatedly installed. We use these on all of our custom 13XX builds, they're very stable, fit perfect, don't mark-up the barrel and dampen vibration in the barrel and tube. Made of high-impact polymer they're much harder, stronger and more stable than the older Backpacker version.

The cap screw fits a 9/64 hex wrench or bit which is not included.

WE ALSO HAVE A VERSION LISTED WITH A BLACK ALLOY-STEEL SCREW