This trigger group fits all Discovery, Maximus, Fortitude 1760 & 2260 models. It has our custom stainless steel trigger kit, aluminum safety, all the contact points are polished and it's assembled with Mobil 28 grease for long life and smooth operation. The casing and cover are the original Crosman / Benjamin polymer version. This is a high-performance single-stage setup with adjustable travel in both directions and a light pull. It's adjusted to a short travel that's very easy to pull for fast response and improved accuracy. The wide, thin trigger is extremely comfortable and leaves a lot of extra room in the trigger guard for adult-sized fingers. Trigger pull varies from around 8 oz to 3 lbs depending on how much hammer spring tension you have and how smooth your striker assembly works.
It's shipped ready to mount and use. Further adjustment can cause the gun to fire unexpectedly or not at all and should only be done by experienced individuals. A .050" hex wrench or bit (not included) is needed to adjust the travel screws. The top screw adjusts how high the sear rises, this should be adjusted so the safety engages smoothly without leaving forward travel for the trigger. The bottom screw adjusts how far down the sear will move, it can be adjusted to limit trigger pull to only what is need for the gun to fire. Too short of a travel adjustment can prevent the gun from firing when the trigger is pulled. This is a dangerous situation where the hammer is partially released and could fire unexpectedly. To correct this safely, fully cock the gun and engage the safety. Then adjust the screw away from the trigger until it will fire correctly.
The custom power adjusters, hammer springs and valves we have listed are designed to produce more power with less hammer force, this helps reduce trigger pull while retaining or gaining power.